Insert Bearings Spherical OD

Contact Now


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 


 

AMI UC212-39 Insert Bearings Spherical OD

4800 rpm 6300 rpm
1.00 mm 29.00 mm

AMI UC205 Insert Bearings Spherical OD

124 ° e7
45 mm 40 mm

AMI UC202-10 Insert Bearings Spherical OD

1.50 mm 6000 rpm
42.90 mm One Seal & Snap-Ring

AMI UC205-15 Insert Bearings Spherical OD

380 mm 150 mm
0.3 338 mm

AMI UC201-8 Insert Bearings Spherical OD

1.7 110 mm
20 mm 2CC

AMI UC206 Insert Bearings Spherical OD

271.2 N·m 136 kN
EPR 18 5

AMI UC205-14 Insert Bearings Spherical OD

MBL 32 25 mm
27.5 mm 160 mm

AMI UC204-12 Insert Bearings Spherical OD

2800 rpm One Shield & Snap-Ri
150.0000 mm 66.70 mm

AMI UC210-32 Insert Bearings Spherical OD

4500 rpm 72800 N
53000 N Shield & Seal & Snap

AMI UC205-16 Insert Bearings Spherical OD

12 mm 718.860 kN
22.3 mm 820 mm

AMI UC206-19 Insert Bearings Spherical OD

0.3 mm 0.052 kg
20 mm 38.5 mm

AMI UC216 Insert Bearings Spherical OD

1122 mm 905 mm
360 r/min 7.2 mm
1/11