Insert Bearings Spherical OD

Contact Now


Ball Bearing Inserts. Constructed of high quality 52100 steel, ball bearing inserts are used inside pillow block and flange housings or in custom housed applications. They are most commonly produced with a spherical OD to allow for misalignment, but are also available with a cylindrical OD.

 

 

The SER insert has a cylindrical OD and is equipped with a snap ring in the outside diameter. The SER insert bearing is used in applications where the housing is machined to accept snap rings or the snap ring is used for the retention of the bearing. It features a Neoprene Contact Seal designed to keep lubricant in while keeping contaminants out.UC200 Insert ball bearing with wide inner ring and two set screws. Spherical OD and grease feeding groove. UC Series Insert Bearings has a set screw locking and is held in position on the shaft by two set screws which are directly on the extended end of the inner ring. UC200 Series Insert Ball Bearings are self-aligning for standard load capacity.

 


 

AMI UC214-43 Insert Bearings Spherical OD

EPR 15 466.725 mm
203.2 mm 152.4 mm

AMI UC210-31 Insert Bearings Spherical OD

66.6 mm 52.6 mm
9.5 kN 60.4 mm

AMI UC207-20 Insert Bearings Spherical OD

68.00 mm 225000 N
2600 rpm 3300 rpm

AMI UC211-35 Insert Bearings Spherical OD

102 mm ETS 3036 R
333 mm 47 mm

AMI UC209-28 Insert Bearings Spherical OD

3.745 kN 0.6 mm
15 mm 7.718 kN

AMI UC209 Insert Bearings Spherical OD

330 85 mm
43 mm 162 mm

AMI UC208 Insert Bearings Spherical OD

207 kN EPR 21
441.325 mm 1 in

AMI UC208-24 Insert Bearings Spherical OD

2DE 25 mm
1.5 mm 8500 r/min

AMI UC207-22 Insert Bearings Spherical OD

40 mm 24 mm
142 mm 50 mm

AMI UC207-23 Insert Bearings Spherical OD

2 475 mm
1730 kN 0.33

AMI UC207 Insert Bearings Spherical OD

0.64 mm 28000 rpm
22000 rpm Snap-Ring

NTN UC205-100D1 Insert Bearings Spherical OD

0.2 mm 1
43000 r/min 22 mm
2/11